SK EN 10289:2008

Tubat prej çeliku dhe pajisje për tubacionet në tokë dhe në bregdet -Veshjet nga jashtë lëngut me epoksid ose epoksid të modifikuar

Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings

Asnjë informacion i shtuar.

The standard defines the reqiurements of liquid applied external coating, epoxy (EP) and epoxy-modified (EP-MOD), for the corrosion protection of tubes and pipeline fittings. The coating in this standard can be applied to longitudinally or spirally welded and to seamless steel tubes and fittings used for the construction of pipelines for conveying liquids or gases. If the component has to be cold bent the coating shall be applied after bending unless otherwise approved by the purchaser. The coating shall consist normally of one layer of liquid product, applied by brush or by spray airless technique. Other application methods can be recommended by the product manufacturer, in accordance with the kind of product. This coating can be used for the protection of buried or submerged steel tubes for service at the following temperatures and with three thickness classes A (400 *m), B (800 *m) and C(1500 *m) based on the following combination: - type 1 : - 20 °C to 40 °C, thickness class A or B or C - type 2 : - 20 °C to 60 °C, thickness class B or C - type 3 : - 20 °C to 80 °C, thickness class C Other temperatures can be agreed ; in this case, tests shall be carried out at the required temperature. In this standard the word components is used for tubes and fittings. Frequencies of tests on fittings shall be agreed by the parties at the ordering stage. Components coated with these types of coatings may be further protected by means of cathodic protection.