Republika e Kosovës
Ministria e Tregtisë dhe Industrisë
Standardizim   

SK EN 14605:2005+A1:2014

Shtëpi » Standardizim » SK EN 14605:2005+A1:2014
SK EN 14605:2005+A1:2014
Status: Published
Gjuha: English
Faqe: 14
Publikuar: 2014-09-30
Regjistri Kombëtar:
Botim:
Standardet ndërkombëtare që kanë lidhje
This standard is identical to:
EN 14605:2005+A1:2009
CEN/TC 162
Çmim: 18 €



Titulli Shqip

Veshje mbrojtëse ndaj produkteve kimike të lëngshme - Kërkesat e performancës për veshjet me lidhje të padepërtueshme nga lëngjet (Tipi 3) ose të padepërtueshme nga spërklat (Tipi 4), përfshirë artikujt që mbrojnë vetëm pjesët e trupit (Tipi PB (3) dhe PB

Titulli Anglisht

Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])

Scope Shqip

Asnjë informacion i shtuar.

Scope Anglisht

This document specifies the minimum requirements for the following types of limited use and reusable chemical protective clothing: - Full-body protective clothing with liquid-tight connections between different parts of the clothing (Type 3: liquid-tight clothing) and, if applicable, with liquid-tight connections to component parts, such as hoods, gloves, boots, visors or respiratory protective equipment, which may be specified in other European Standards. Examples of such clothing are one-piece coveralls or two-piece suits, with or without hood or visors, with or without boot-socks or over-boots, with or without gloves; - Full-body protective clothing with spray-tight connections between different parts of the clothing (Type 4: spray-tight clothing) and, if applicable, spray-tight connections to component parts, such as hoods, gloves, boots, visors or respiratory protective equipment, which may be specified in other European Standards. Examples of such clothing are one-piece coveralls or two-piece suits, with or without hood or visors, with or without boot-socks or over-boots, with or without gloves; - Partial body protection garments offering protection to specific parts of the body against permeation of chemical liquids. Examples of such garments are e.g. laboratory coats, jackets, trousers, aprons, sleeves, hoods (not air-supplied) etc. As partial body protection leaves some parts of the body unprotected this document specifies only the performance requirements for the clothing material and the seams. NOTE Partial body chemical protective garments which offer only protection against penetration of chemical liquids are within the scope of EN 13034 (Type PB [6] clothing).

Komitetet Teknike

ICS

Direktivë

Veprim Kombëtar

Asnjë informacion i shtuar.