SK EN 15377-3:2009Titulli ShqipImpiante ngrohës në godina -Projektim I impianteve ngrohës dhe ftohës që ushqehen me ujë të futura n[n dysheme, mure dhe dysheme -Pjesa 3 : Krijimi i kushteve më të përshtatëshme për përdorimin e burimeve të energjisë së ripërsëritshme
Titulli AnglishtHeating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 3: Optimizing for use of renewable energy sources
Scope ShqipAsnjë informacion i shtuar.
Scope AnglishtThis document is applicable to water based surface heating and cooling systems in residential, commercial and industrial buildings.
The methods apply to systems integrated into the wall, floor or ceiling construction without any open air gaps.
The methods do not apply to heated or chilled ceiling panels or beams.
This standard is part 3 of a series of standards:
- Part 1: Determination of the design heating and cooling capacity;
- Part 2: Design, dimensioning and installation;
- Part 3:Optimizing for use of renewable energy sources.
The aim of the present standard is to give a guide for the design to promote the use of renewable energy sources and to provide a method for the use of Thermo-Active-Building-Systems (TABS).
The method allows calculation of peak cooling capacity of a thermo-active system, based on heat gains (solar, internal loads, ventilation).
This method also allows calculation of the energy demand on the water side (system) to be used for sizing of the cooling system, e.g. chiller, fluid flow rate.
Steady state heating capacity is calculated according to method B or E of prEN 15377-1 (part 1 of this series of standards).
Komitetet TeknikeICSDirektivëAsnjë informacion i shtuar.Veprim Kombëtar
SK EN ISO 11855-4:2017
replaces
SK EN 15377-3:2009
- 2016-07-22
ShënimetKy standard shfuqizohet nga edicioni i ri!
Numri Standardit
Gjuha
Status
Publikuar
Faqe
Çmim
Blej
Withdrawn
2012-02-15
56
38 €
Sistemet e ngrohjes në ndërtesa -Projektimi i sistemeve ngrohës dhe ftohës të inkorporuar që ushqehen me ujë -Pjesa 1 : Përcaktimi I fuqisë (kapacitetit) termike të projektimit për ngrohjen dhe ftohjen
|