Republika e Kosovës
Ministria e Tregtisë dhe Industrisë
Standardizim   

SK EN 15302 :2023

Shtëpi » Standardizim » SK EN 15302 :2023
SK EN 15302 :2023
Status: Published
Gjuha: English
Faqe: 142
Publikuar: 2023-07-31
Regjistri Kombëtar: 495/2023
Botim:
Standardet ndërkombëtare që kanë lidhje
This standard is identical to:
prEN 15302 rev
CEN/TC 256
Çmim: 55 €



Titulli Shqip

Zbatime në hekurudhë-Metoda per përcaktimin e konicitetit ekuivalent

Titulli Anglisht

Railway Applications - Wheel-rail contact geometry parameters - Definitions and Methods for evaluation

Scope Shqip

Asnjë informacion i shtuar.

Scope Anglisht

This European Standard establishes definitions and evaluation methods for wheel-rail contact geometry parameters influencing the vehicle running dynamic behaviour: - the rolling radius difference between the two wheels of a wheelset (Δr-function) which serves as a basis for all further calculations, - the equivalent conicity function from which are derived - a single equivalent conicity value for a specified amplitude which is relevant for the assessment of vehicle running stability on straight track and in very large radius curves according to EN 14363 - the nonlinearity parameter which characterizes the shape of this function and is related to the vehicle behaviour particularly in the speed range close to the running stability limit, - the rolling radii coefficient which is used to describe the theoretical radial steering capability of a wheelset in a curved track. Additional information is given about the relationship between the contact angles of the two wheels of a wheelset (Δγ -function) which serves as a basis for the calculation of the linearized parameters gravitational stiffness and the roll angle parameter. NOTE Out of the presented parameters only those related to the contact angle are relevant for independently rotating wheels of wheel pairs. Descriptions of possible calculation methods are included in this European Standard. Test case calculations are provided to achieve comparable results and to check the proper implementation of the described algorithms. To validate alternative methods not described in this European Standard acceptance criteria are given for the equivalent conicity function. This includes reference profiles, profile combinations, tolerances and reference results with tolerance limits. This European Standard also includes minimum requirements for the measurement of wheel and rail profiles as well as of the parameters needed for the transformation into a common coordinate system of right- and left-hand profiles. This European Standard does not define limits for the wheel-rail contact geometry parameters and gives no tolerances for the rail profile and the wheel profile to achieve acceptable results. For the application of this European Standard some general recommendations are given.

Komitetet Teknike

ICS

Direktivë

Asnjë informacion i shtuar.

Veprim Kombëtar

Numri Standardit
Gjuha
Status
Publikuar
Faqe
Çmim
 
Blej
English
Withdrawn 
2019-05-15 
128 
55 € 
PDF
Blej
Zbatime në hekurudhë-Metoda per përcaktimin e konicitetit ekuivalent
English
Withdrawn 
2014-07-14 
126 
55 € 
PDF
Blej
Zbatime në hekurudhë-Metoda për përcaktimin e konicitetit ekuivalent