prSK SSH/EN/ISO 19085-10:2024
Faza: 40 - Enquiry stage
Filloj: 2024-07-31 Mbaroj: 2024-09-30 Standardet ndërkombëtare që kanë lidhje
This standard is identical to: EN ISO 19085-10:2019 CEN/TC 142
This standard is identical to: ISO 19085-10:2018 ISO/TC 39/SC 4
This standard is identical to: SSH EN ISO 19085-10:2019
Titulli ShqipMakinat e përpunimit të drurit – Siguria – Pjesa 10: Sharrat e kantjerit (ISO 19085-10:2018)
Titulli AnglishtWoodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018, Corrected version 2019-12)
Scope ShqipAsnjë informacion i shtuar.
Scope AnglishtISO 19085-10:2018 gives the safety requirements and measures for displaceable building site saws, designed to cut wood and materials with similar physical characteristics to wood, hereinafter referred to as "machines".
NOTE 1 For the definition of displaceable machine, see ISO 19085‑1:2017, 3.5.
ISO 19085-10:2018 deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
The machine can also be fitted with a device for the saw blade to be manually raised and lowered through the table, whose hazards have been dealt with.
This document does not apply to the following:
a) machines with a maximum saw blade diameter smaller than 350 mm or greater than 500 mm;
b) hand-held woodworking machines, including any adaptation permitting their use in a different mode, i.e. bench mounting;
c) machines with a device to tilt the saw blade for angle cutting, machines with more than one saw blade rotational speed and machines equipped with a sliding table;
NOTE 3 Hand-held motor-operated electric tools are covered by IEC 62841‑1 together with IEC 62841‑2‑5.
NOTE 4 Machines with the device to tilt the saw blade for angle cutting, machines with more than one saw blade rotational speed and machines equipped with a sliding table are considered as table saws, covered by ISO 19085‑9.
ISO 19085-10:2018 is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.
Komitetet TeknikeICSDirektivëVeprim Kombëtar
prSK SSH/EN/ISO 19085-10:2024
replaces
SK EN 1870-19:2017
- 2024-05-27
Dokumentët që kanë lidhjeJu duhet të jenë anëtarë të komitetit teknik që të keni akses në dokumentet e projektit. Nëse ju jeni një anëtarë të këtij komiteti teknik që ju duhet të identifikoheni për të parë dokumentet. Llogaria ime |