Republika e Kosovës
Ministria e Tregtisë dhe Industrisë
Standardizim   

SK EN 16474:2020

Shtëpi » Standardizim » SK EN 16474:2020
SK EN 16474:2020
Status: Published
Gjuha: English
Faqe: 73
Publikuar: 2020-08-17
Regjistri Kombëtar: 313/2020
Botim:
Standardet ndërkombëtare që kanë lidhje
This standard is identical to:
EN 16474:2015
CEN/TC 145
Çmim: 45 €



Titulli Shqip

Makina për gomë dhe lëndë plastike - Makinat që trajtojnë gomat - Kërkesa sigurie

Titulli Anglisht

Plastics and rubber machines - Tyre curing machines - Safety requirements

Scope Shqip

Asnjë informacion i shtuar.

Scope Anglisht

This European Standard applies to tyre curing machines having the following configuration. - crossing flow tyre curing machines, with two cavities with: - common curing cycle and common safeguarding; or - independent curing cycles and common safeguarding; or - independent curing cycles and independent safeguarding. - tyre curing machines with one cavity. - tyre curing machines with automatic rear feeding and discharge. The safety requirements and/or protective measures specified in this European Standard apply to tyre curing machines for passenger vehicle tyres and truck tyres. This European Standard does not deal with: - feeding system and discharge system; - tyre curing machines with manual loading of the green tyre into the mould and manual unloading of the cured tyre from the mould; - ancillary equipment which is not an integral part of the tyre curing machine, e.g. conveying equipment; - exhaust systems. This European Standard deals with all significant hazards, hazardous situations and events relevant to tyre curing machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It does not deal with hazards associated with falling of parts of the container or mould. Some tyre curing machines include pressure vessels, which fall under Directive 97/23/EC [1]; this European standard is not intended to support the Directive 97/23/EC. This European Standard is not applicable to tyre curing machines which are manufactured before the date of its publication as an EN. Hazard associated with falling of parts of the container or mould are not covered by this European Standard. Safety requirements relating to the design of ancillary equipment which is not an integral part of the tyre curing press, e.g. conveying equipment are not covered in this European Standard. Safety requirements relating the design of exhaust systems are not covered in this European Standard. This European Standard covers the significant hazards listed in Clause 4. NOTE This European Standard is not intended to support the PED [1]. For pressure hazards, see informative Annex A. This document is not applicable to tyre curing presses which are manufactured before the date of its publication as EN.

Komitetet Teknike

ICS

Direktivë

Veprim Kombëtar

Asnjë informacion i shtuar.