SK EN 60360:2013

Metoda standard e matjes se temperatures te nxehjes se kapsules se llambes

Standard method of measurement of lamp cap temperature rise

Asnjë informacion i shtuar.

This Standard states the technical and dimensional requirements for lampholders for tubular fluorescent lamps and for starterholders, and the methods of test to be used in determining the safety and the fit of the lamps in the lampholders and the starters in the starterholders. This standard covers independent lampholders and lampholders for building-in, used with tubular fluorescent lamps provided with caps as listed in annex A, and independent starterholders and starterholders for building-in, used with starters in accordance with EN 60155, intended for use in a.c. circuits where the working voltage does not exceed 1 000 V r.m.s. This standard also covers lampholders for single capped tubular fluorescent lamps integrated in an outer shell and dome similar to Edison screw lampholders (e.g. for G23 and G24 capped lamps). Such lampholders shall further be tested in accordance with the following subclauses of EN 60238: 8.4; 8.5; 8.6; 9.3; 10.7; 11; 12.2; 12.5; 12.6; 12.7; 13; 15.3; 15.4; 15.5 and 15.9. Lampholders designed with a barrel thread for shade holder rings shall comply with the current edition of EN 60399. As far as it applies, this standard also covers combinations of lampholders and starterholders as well as lampholders or combinations which are wholly or partly integral with the luminaire. It also applies, as far as is reasonable, to lampholders and starterholders other than the types explicitly mentioned above and to lamp connectors. Where the term "holders" is used in the standard, both lampholders and starterholders are intended.

SK EN 60360:2018 replaces SK EN 60360:2013 - 2016-07-22

Ky standard shfuqizohet nga edicioni i ri!