Logo <p>Agjencia Kosovare p&euml;r Standardizim Adres&euml;: Rr. &quot;Ismail Hajdaraj&quot; p.n.10000 Prishtin&euml;/Republika e Kosov&euml;s. Tel.+ 383 38 512 779 Fax: +383 38 512 798 Email:aksinfo@rks-gov.net</p> Date: 2024-11-22
Time: 01:07


SK EN 14313:2009+A1:2014
Status: Withdrawn
Gjuha: English
Faqe: 40
Publikuar: 2014-11-24
I tërhequr: 2022-04-07
Regjistri Kombëtar: 130/2014
Botim:
Standardet ndërkombëtare që kanë lidhje
This standard is identical to:
EN 14313:2009+A1:2013
CEN/TC 88
Çmim: 32 €



Titulli Shqip

Produkte për izolim termik për paisjet e ndërtesave dhe instalime industriale - Produkte shkume polietileni (PEF)të prodhuar në fabrikë - Specifikim

Titulli Anglisht

Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification

Scope Shqip

Asnjë informacion i shtuar.

Scope Anglisht

This European Standard specifies the requirements for factory made flexible polyethylene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately – 80 °C to + 150 °C. NOTE Tensile stress in the insulation product should be avoided when applying PEF. This is even more important when applying PEF on lines with operating temperatures between – 50 °C and – 80 °C. The tensile stress should be kept at the minimum by applying the foam “under pressure”, i.e. cutting the parts in a generous way. Manufacturer’s advice should be heeded in all cases. This European Standard specifies the requirements for factory made flexible polyethylene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately – 80 °C to + 150 °C. NOTE Tensile stress in the insulation product should be avoided when applying PEF. This is even more important when applying PEF on lines with operating temperatures between – 50 °C and – 80 °C. The tensile stress should be kept at the minimum by applying the foam “under pressure”, i.e. cutting the parts in a generous way. Manufacturer’s advice should be heeded in all cases. The products are manufactured in the form of tubes, profiles, sheets, rolls and tapes with or without coating and/or self-adhesive backing and/or different closure systems. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required

Komitetet Teknike

KT-8 - KT. për Energji

ICS

91.100.60 - Materiale për izolim termik dhe akustik

Direktivë

89/106/EEC - Direktiva e Keshillit 89/106/EEC ne 21 Dhjetor 1988 per Produkte ndërtimi
305/2011 - Rregullorje (EU) Nr.305/2011 e Parlamentit evropian dhe Këshillit e 9 marsit 2011 duke tërhequr krikteret e harmonizimit të tregut për produktet ndërtimore dhe shfuqizimin e Direktivës së Këshillit 89/106/EEC

Veprim Kombëtar

Asnjë informacion i shtuar.

Shënimet

Nr. Prot 130/2014 published Nr. prot 392/2022 withdrawn
Copyright 2019 Agjencia Kosovare për Standardizim